Shipping Canada-wide · Free delivery on orders over $200
Mira Washroom Products & Specialties

Specifying Division 10?

We supply Frost, Bobrick, Dyson, Xlerator, Koala Kare and ASI across Canada — with submittal-ready model codes and finishes.

Talk to a specifier

New this month

The matte black finish line, now its own collection across signage, site furnishings and fittings.

Shop Matte Black

Product Guides

Towel Dispenser and Waste Combination Units: When One Cabinet Beats Two

How they work, where they make sense, and what to decide before you order one.

Frost FR-400 A large recessed paper towel dispenser and waste receptacle combination unit

Walk into almost any new office, school or arena washroom and you’ll see it: one stainless steel panel where the paper towels come out at the top and the used ones go in at the bottom. A combination unit does the job of two separate fixtures, and in the right washroom it’s the cleanest choice you can make.

Here’s how they work, where they make sense, and what to decide before you order one.

What a combination unit is

A combination unit puts a paper towel dispenser and a waste receptacle in one cabinet. Users take a towel, dry their hands and drop it straight into the bin below, without walking across the room to find a garbage can. Cleaning staff refill and empty everything from one door.

Why choose a combination unit?

  • One fixture instead of two. Fewer wall penetrations, one cut-out and one piece to install.
  • Tidier floors. The bin sits right under the towels, so fewer used towels end up on the floor.
  • A clean, built-in look. Recessed models sit nearly flush with the wall, which suits modern and design-led washrooms.
  • Easier servicing. One unit to check, refill and empty on every round.

Recessed, semi-recessed or surface-mounted

This is the first decision, and it depends on the wall more than the budget.

  • Recessed units sit inside the wall, so only the face shows. They need a wall cavity deep enough for the cabinet, so they’re planned at the framing stage. Examples: Frost FR-400 A and FR-410 A, Bobrick B-3974.
  • Semi-recessed units sit partly in the wall and partly out. They suit walls that can’t take the full cabinet depth. Examples: Frost FR-400 B, FR-410 B and FR-415B.
  • Surface-mounted units fix to a finished wall, which makes them the go-to for renovations. Examples: Frost FR-400 C, Bobrick B-3699 and B-3979.

Frost also makes 4.5″-depth versions (the FR-400-14, FR-410-14 and FR-415-14 families) for shallower walls. Always check the rough-in dimensions on the manufacturer’s spec sheet, linked from every product page, before the wall is framed.

Size: large, medium or small

Frost’s combination units come in large (FR-400), medium (FR-410) and small (FR-415) sizes. The larger the unit, the more towels and waste it holds between services. Busy washrooms with peak times, like schools, arenas and transit, are good candidates for a large unit. A small unit suits a single-user or low-traffic washroom.

Towel type: folded, control roll or automatic

  • Folded towels (the standard FR-400, FR-410 and FR-415 families) are simple and familiar.
  • Control roll units (FR-400-50 and FR-422-50) dispense one towel at a time, which helps cut waste.
  • Hands-free mechanical (FR-422-60) and automatic (FR-400-70, FR-422-70, Bobrick B-3974 and B-3979) units mean nobody touches the dispenser.

Closed or open waste

Most units have a closed waste door. Frost’s FR-422 family has an open waste opening instead, which is quicker for users and suits very busy washrooms. Choose a closed waste door where appearance matters most.

Convertible models

Bobrick’s B-3949 and B-39619 are convertible: they can be set up for different towel types. That’s handy for facilities that might change paper suppliers later.

Matching the rest of the room

Most combination units are satin stainless steel, so they sit naturally with stainless grab bars, mirrors and dispensers. For a black washroom, Frost makes the FR-400-14A-BLK, a recessed 4.5″-depth unit in matte black.

Before you order

  • Confirm the wall type and cavity depth for recessed or semi-recessed units.
  • Choose the towel type your facility will actually stock.
  • Check the mounting height and projection against the accessibility requirements for your project.
  • Send us your drawings or fixture list, and we’ll match the model and quote it with the rest of your washroom order.

Ready to choose?

Towel and waste combination units, shipped Canada-wide

Browse recessed, semi-recessed and surface-mounted models, or send us your fixture list for a quote.

Browse combination units Request a quote